Brush vacuum cleaning

Removing dry, loose dirt from floor coverings using the brush vacuum cleaner. Suitable for low-pile, robust textile floor coverings, carpets and upholstery. The motor-driven brush roller will achieve a better cleaning result than dry vacuum cleaning.

Preparatory work

Select suitable products to match the surface to be cleaned (type / square metres) and the type of soiling.

Check, equip and ready the vacuum cleaner and all accessories in compliance with the instructions for use.

Put up the warning sign.

Pick up and dispose of very coarse dirt (e.g. strings, wadded-up paper, etc.) by hand. Remove chewing gum, if any.

Switch on the vacuum cleaner and adjust the brush roller on the suction nozzle to the correct height.

Main task

Use the brush vacuum cleaner to brush-vacuum the area in slightly overlapping passes; start from the wall socket and work your way across the room.

Perform a visual check.

Final steps

Check the power cable for visible damage, clean the cable and roll it up loosely towards the plug.

Remove the warning sign.

Check the brush roller and remove any entangled hairs, threads, etc.

Check the fill level of the filter bag; change the bag if it is full.

Dispose of any waste.

Clean the cleaning equipment and replace as needed.

Comments

Wear the personal protective equipment (PPE) required by company regulations, safety data sheets and / or instructions for use.
Always check in advance which product meets your requirements (see Wetrok Cleaning & Care Instructions).
Wetrok AG accepts no liability for damage caused by improper use or incorrect product selection.