Dry vacuuming

Removing dry, loose dirt from floor coverings and surfaces using the dry vacuum cleaner. Suitable for textile and textured floor coverings and surfaces.

Preparatory work

Select suitable products to match the surface to be cleaned (type / square metres) and the type of soiling.

Check, equip and ready the vacuum cleaner and all accessories in compliance with the instructions for use.

Pick up and dispose of coarse dirt (e.g. strings, bottles, etc.) by hand.

Put up the warning sign.

Main task

Use the dry vacuum cleaner to dry-vacuum the area in slightly overlapping passes; start from the wall socket and work your way across the room.

Perform a visual check.

Final steps

Clean the suction nozzle.

Check the power cable for visible damage, clean the cable and roll it up loosely towards the plug.

Remove the warning sign.

Check the fill level of the filter bag; change the bag if it is full.

Dispose of any waste.

Clean the cleaning equipment and replace as needed.

Comments

Wear the personal protective equipment (PPE) required by company regulations, safety data sheets and / or instructions for use.
Always check in advance which product meets your requirements (see Wetrok Cleaning & Care Instructions).
Wetrok AG accepts no liability for damage caused by improper use or incorrect product selection.