Foam cleaning Industrial foaming, low pressure cleaning

Removing loose and stubborn dirt from the surfaces using the foamed cleaning product solution from the foaming device. Suitable for water-resistant surfaces (walls and furniture).

Preparatory work

Select suitable products to match the surface to be cleaned (type / square metres) and the type of soiling.
Check, equip and ready the device and all accessories in compliance with the instructions for use.
Fill the foam cleaning product in accordance with the dosing instructions into the container on the foaming device or connect the container directly to the low-pressure unit.
Put up the warning sign.
Pre-clean the surface with plenty of water and remove any loose dirt. Rinse from the bottom up and finish by rinsing the floor.

Main task

Apply the cleaning foam to the surface to be cleaned, working from the bottom up in slightly overlapping passes.
Allow the cleaning foam to take effect as needed, but don't let it dry.
Remove highly stubborn soiling with the soft brush or the non-abrasive pad.
Rinse the surface to be cleaned with plenty of clear water, working from the top down in overlapping passes.
As needed: Dry the fittings, the walls and the floor.
Perform a visual check.

Final steps

Remove the warning sign once the floor covering is dry.

Dispose of any waste.

Clean the cleaning equipment and replace as needed.

Comments

  • Wear the personal protective equipment (PPE) required by company regulations, safety data sheets and / or instructions for use.
  • Always check in advance which product meets your requirements (see Wetrok Cleaning & Care Instructions).
  • Wetrok AG accepts no liability for damage caused by improper use or incorrect product selection.

You can use these products

Find out more

10811 FIXOFOAM FOAM PISTOLET
10786 SMART FOAM 3 PRESSURE FOAMER
11502 CALEFOM
11522 REOFOM

These methods may also be of interest to you

Disinfection - Quick disinfection of surfaces (small surfaces)

Applying the ready-to-use disinfectant or the disinfectant solution on small surfaces using a suitable cleaning cloth to kill specific microbes and / or deactivate viruses. Suitable for cleaned, dry, alcohol- and water-resistant surfaces.

Disinfection - Surface disinfection (large areas)

Applying the ready-to-use disinfectant or the disinfectant solution on surfaces and floor coverings using a suitable cleaning cloth to kill specific microbes and deactivate viruses. Suitable for cleaned, dry, water-resistant surfaces (e.g. floor coverings).

Steam vacuum cleaning

Removing stubborn dirt from surfaces and floor coverings using the hot steam jet from the steam vacuum cleaner. Suitable for temperature- and water-resistant surfaces and floor coverings.

Hello! I am Ben

Find the right method with me: